🛠️ What did you do to your Jeep 392 today?

[justinB]

I always carry a 24” breaker bar so I can change tire myself.

Maybe put the breaker bar where your scissor jack is? I have mine wrapped in a towel so it doesn't rattle and have it tucked in there, along with the deep socket.

 

[Fast-n-Furious]

Maybe put the breaker bar where your scissor jack is? I have mine wrapped in a towel so it doesn't rattle and have it tucked in there, along with the deep socket.

Good idea. I’ll give it a try, thanks.

 

[Mouse]

I carry one of these in all my vehicles, they collapsed down by half the length and the bent tip reaches into most wheels without an extension.

https://www.amazon.com/Gorilla-Automotive-1721-Telescoping-Wrench/dp/B000CMJ2KU/?tag=jeep392-20

 

[5h4g]

Installing 37" Recon Grapplers tomorrow... already installed the Synergy spacers and Clayton bumpstop pads at 2".
The spacers on the 35"s made a big difference in how the Jeep feels over the road, handles, etc. Got a tazer mini to adjust MPH reading, and some rigid amber pods for A-pillar. Can't wait to get it all done, will post picks when complete. Lets roll!

 

[5h4g]

As promised, here are the pics of my "Green Machine" 392. Poison Spyder Bruizer front and rear bumpers (w/tire carrier). 37 x 13.50 Ridge Grapplers, Black Rhino "Stadium" wheels (17 x 9.5) Warn Evo Winch, Rigid lights, Warn shackles, Rock Slide Engineering powered step sliders.

pure sex

 

[5h4g]

pure sex

how do the 13.5" grapplers track the road so far compared to 12.5's?

 

[Fast-n-Furious]

Maybe put the breaker bar where your scissor jack is? I have mine wrapped in a towel so it doesn't rattle and have it tucked in there, along with the deep socket.

Tried and perfect fit, still has room for that orange jack pad and other small stuff. Thanks!

 

[7.62x392]

Installed the bulletpoint mounting system. The system as a while seems super sturdy.

They also threw in a free bullet bottle opener.

I just ordered the parts to run a car play accessible USB hub to the top of the dash similar to the what the person did in the link below. Will post results when installed sometime next week.

How to add a CarPlay USB A port + 1 x QC 3.0 USB-A 18w + 2 x 20w PD USB-C ports on upper dash

Hello all, Just wanted to share my interior mods. I added a CarPlay USB A port + 1 x QC 3.0 USB-A 18w + 2 x 20w PD USB-C ports on upper dash. Also a Mount kit for my phone and iPad. CarPlay and charging still work on OEM USB ports. Parts: (Not affiliated links) AXXESS MECAXUSBMINIB, USB to...

www.jlwranglerforums.com

 

[Cali392JL]

I carry one of these in all my vehicles, they collapsed down by half the length and the bent tip reaches into most wheels without an extension.

https://www.amazon.com/Gorilla-Automotive-1721-Telescoping-Wrench/dp/B000CMJ2KU/?tag=jeep392-20

I have the exact same thing, and I've been very happy with it. Stashes away nicely and can apply some pretty good torque to it when you extend the handle. I have added a short extension into the pouch just to let it clear the edge of the tire a bit.

 

[Justinoptimus]

PPF stealth wrap complete. Very happy with it

 

[5h4g]

PPF stealth wrap complete. Very happy with it View attachment 21882View attachment 21883View attachment 21884View attachment 21885View attachment 21886

This is amazing. What is the stealth wrap?

 

[5h4g]

PPF stealth wrap complete. Very happy with it View attachment 21882View attachment 21883View attachment 21884View attachment 21885View attachment 21886

This is amazing. What is the stealth wrap

Installing 37" Recon Grapplers tomorrow... already installed the Synergy spacers and Clayton bumpstop pads at 2".
The spacers on the 35"s made a big difference in how the Jeep feels over the road, handles, etc. Got a tazer mini to adjust MPH reading, and some rigid amber pods for A-pillar. Can't wait to get it all done, will post picks when complete. Lets roll!

ok so this happened, and all I gotta say after a day of driving it on the street, over some rough terrain, and even my favorite gully run I do with the kids, is that this machine with 37's and spacers feels incredible! Eats up the road, handles a dream, stays lean on the corners, and just feels incredible in every respect. It's like a different machine altogether... feels like a suspension upgrade.

As promised some quick pics.

 

[Justinoptimus]

This is amazing. What is the stealth wrap?

Thanks! The wrap is a paint protection film (ppf) wrap. You can have it done in clear or stealth . Stealth is a matte finish. Similar to an iPhone screen protector in a matte finish. I used the xpel brand. Creates a satin look and it’s much stronger than a vinyl wrap. Hope that helps.

 

[Jgc650i]

Already a big fan of Hotheads Hedliner folks and had previously installed the Headliner for SOT and full floor Sound Assassin on The Beast. Today I added their Sunshade for SOT. I went with gray for a little contrast with black interior and Granite Crystal exterior. Super easy install, nice tight fit, and excellent quality product/workmanship. I have Seat Jackers installed and thought I might hit the sunshade (I’m 6’1” tall), but the fit is perfect and I have good clearance. Another great product from the Hotheads Team!

 

[5h4g]

Thanks! The wrap is a paint protection film (ppf) wrap. You can have it done in clear or stealth . Stealth is a matte finish. Similar to an iPhone screen protector in a matte finish. I used the xpel brand. Creates a satin look and it’s much stronger than a vinyl wrap. Hope that helps.

It does! Been wrapping all my builds in Xpel for years, never knew about the matte option... never asked for it either... ha!

 

[Shark01]

PPF and MaxCare Ext warranty....$5k in all

 

[EarlsGoneWild]

Finally installed my KMC Tank wheels; that have been on backorder for 3 months. Also put on my vanity plate this morning.

 

[@WhiteBronze392]

Finally installed my KMC Tank wheels; that have been on backorder for 3 months. Also put on my vanity plate this morning.
View attachment 21996View attachment 21997View attachment 21998View attachment 21999View attachment 22000View attachment 22001

Looks great! Been waiting to see the results

 

[7.62x392]

Finally installed my KMC Tank wheels; that have been on backorder for 3 months. Also put on my vanity plate this morning.
View attachment 21996View attachment 21997View attachment 21998View attachment 21999View attachment 22000View attachment 22001

Those KMCs look awesome!

 

[5h4g]

Finally installed my KMC Tank wheels; that have been on backorder for 3 months. Also put on my vanity plate this morning.
View attachment 21996View attachment 21997View attachment 21998View attachment 21999View attachment 22000View attachment 22001

fantastic!