🛠️ What did you do to your Jeep 392 today?

This looks really good - I have that same triple hoop bar and love the 3-light look. I'd like to do something similar.

How'd you mount those - drill holes in the bumper of some other magic?
Factory hole are already there with plastic plugs
 
I had new side steps/rock rails installed, and priced out some AEV bumpers.
 

Attachments

  • IMG_9266.webp
    IMG_9266.webp
    203.9 KB · Views: 27
Yes, Southlake Tahoe
I thought so. I lived there over 10 years and worked at Cesar's. I go up every summer for a few weeks because I love it and miss it. I have a lot of friends there and love spending time and catching up. I lived off Elk Club on Crystal Aire.
 
I'm driving our 392 Moab to Moab today. For decades Presidents' Day weekend has been our annual first trip to Moab for the year. It always snows on this weekend every single year, so we get to drive over the mountains on I-70 in a snowstorm every year. We got 4" of snow overnight, and it is still snowing hard as I get ready to head out the door. This first trip to Moab each year seems to be a rite of passage. Then we get to go 4-wheeling on slickrock that is really slick rock. Tomorrow we are joining the Red Rock 4-Wheelers club for their Trail of the Month. There are supposed to be 40 Jeeps preregistered for the trail ride. We'll see how many actually show up. Should be a good time. :)
 
I'm driving our 392 Moab to Moab today. For decades Presidents' Day weekend has been our annual first trip to Moab for the year. It always snows on this weekend every single year, so we get to drive over the mountains on I-70 in a snowstorm every year. We got 4" of snow overnight, and it is still snowing hard as I get ready to head out the door. This first trip to Moab each year seems to be a rite of passage. Then we get to go 4-wheeling on slickrock that is really slick rock. Tomorrow we are joining the Red Rock 4-Wheelers club for their Trail of the Month. There are supposed to be 40 Jeeps preregistered for the trail ride. We'll see how many actually show up. Should be a good time. :)
Sounds like a great trip! Y’all have fun! Pics if you get a chance. 😀
 
Drove from UK to Switzerland a week ago and back yesterday. 1500 miles without any issues. Car was fantastic in deep snow, on motorway etc. Couldn’t fault it. 12000 miles now done. The most useable and fun car I’ve owned.
 
Drove from UK to Switzerland a week ago and back yesterday. 1500 miles without any issues. Car was fantastic in deep snow, on motorway etc. Couldn’t fault it. 12000 miles now done. The most useable and fun car I’ve owned.
 

Attachments

  • IMG_7767.webp
    IMG_7767.webp
    124.8 KB · Views: 19
  • IMG_7769.webp
    IMG_7769.webp
    272.4 KB · Views: 20
Sounds like a great trip! Y’all have fun! Pics if you get a chance. 😀
We had a great time in Moab. We went with the Red Rock 4-Wheelers on a trail called Deadman Point, with 23 vehicles. After that trail, the group split and six vehicles that wanted a little more challenge did a trail called Deadman Spring. Deadman Spring got its name from a man that was found dead next to the spring in about 1890 to 1895. I managed to scrape a skid plate twice on Deadman Spring. The most challenging part was an uphill section on a north facing slope that was slick with the snow cover.

Here are a few pictures. Deadman Point, Green River in background.
Moab Deadman Point.webp

Deadman Point Trail
Moab Presidents Day 1.webp

Deadman Point Trail. Green River.
Moab Presidents Day 2.webp

Along the way ...
Moab Presidents Day.webp
 
Installed front OE steel bumper close out panels. These are 3D printed ABS PLASTIC. Used factory bolts. Nice solution to tidy up the area.
 

Attachments

  • IMG_7945.webp
    IMG_7945.webp
    121.6 KB · Views: 25
  • IMG_7947.webp
    IMG_7947.webp
    154.6 KB · Views: 22
  • IMG_7952.webp
    IMG_7952.webp
    113.7 KB · Views: 27
  • IMG_7954.webp
    IMG_7954.webp
    111.6 KB · Views: 29
Installed front OE steel bumper close out panels. These are 3D printed ABS PLASTIC. Used factory bolts. Nice solution to tidy up the area.
thanks for posting this!
 
Installed front OE steel bumper close out panels. These are 3D printed ABS PLASTIC. Used factory bolts. Nice solution to tidy up the area.
These are awesome! Literally just ordered a set. I’ve been looking for these for the JL, but have been unsuccessful. I had a set (front and rear) for my JK from Maximus-3 and loved them. Thanks for posting this!!!🫡
 
Ran over something in the snow which hit back on my rear fender 😢. Even the PPF is broken too. If anyone has a OEM rear right fender flare sitting in their garage and willing to sale it please lmk. 🙏🙏🙏 any color will do.
Wis all the forum members stay safe in the storms
IMG_3317.webp
 
Last edited:
Ran over something in the snow which hit back on my rear fender 😢. Even the PPF is broken too. If anyone has a rear right fender flare sitting in their garage and willing to sale it please lmk. 🙏🙏🙏 any color will do.
Wis all the forum members stay safe in the storms
View attachment 53134
Get ya some of these!
 

Attachments

  • IMG_8469.webp
    IMG_8469.webp
    44 KB · Views: 40

Create an account or login to comment

Join now to leave a comment enjoy browsing the site ad-free!

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top