Ted392 Mods

[Ted392]

Sorry for the confusing message on my part. I was replying to that thread of yours. Where are you? Made a bracket to hold the spal fan for cooling the power steering pump. I thought you said you were thinking of trying to design one for that purpose. If you ever dig into that project again, I definitely would like to have a bracket for that project.

No worries. I read your post wrong.

I have it sketched up but need to transfer to cad. Then I can get pricing from fab shop.

 

[Ted392]

More parts on order...
arb on board air, tail lights, 3rd brake light ring, etc.

 

[ParadigmDawg]

I have almost all the parts for you for the fan bracket. Just need to get a 5" L bracket. Next I cam send if you still require it

Heck yeah buddy, thank you. Do you have a link for the fan?

 

[Ted392]

Heck yeah buddy, thank you. Do you have a link for the fan?

No link, but picture, search Amazon: Spal fan 30103018 4" fan.
Wire it in reverse when mounted by swapping red and black at its plug.
I used Aux3.

 

[ParadigmDawg]

No link, but picture, search Amazon: Spal fan 30103018 4" fan.
Wire it in reverse when mounted by swapping red and black at its plug.
I used Aux3.View attachment 36487

Thanks, here is the link.

Amazon.com

 

[Ted392]

Well, I guess if a paintong robot has has bad day, it's best to it here! Inside driverside rear fender.

I'm going to place some nutserts in this area for future mounting points. Once I get them in, I'll install sound deadening.

 

[Ted392]

Installed the rh flush mount taillight. lh is ready, just working on the arb install.

 

[Focker]

Installed the rh flush mount taillight. lh is ready, just working on the arb install.
View attachment 36583

Going to be curious if the blind spot warnings are working on these now, let us know.

 

[ParadigmDawg]

Going to be curious if the blind spot warnings are working on these now, let us know.

That's my concern and I have heard that the quality isn't there with Oracle.

 

[Mallcrawler_392]

That's my concern and I have heard that the quality isn't there with Oracle.

They seem like a good option
https://motobilt.com/products/high-clearance-tail-lights-for-jeep-jl

 

[@WhiteBronze392]

They seem like a good option
https://motobilt.com/products/high-clearance-tail-lights-for-jeep-jl

Yea they look great I saw them at jeep beach but unfortunately they are lights only no BSM. I talked to the guys there and they said they have no intention of adding it.

 

[Ted392]

Yikes, $900! They better be nice.
The Oracles were on sale for $279 and included a $30 gift card. I knew about the potential back up / blind spot, but having them flush mount outweighs the blind spot issue. If they suck, I sell them! Lol

Compressor mounted.

 

[BL Beast]

Yikes, $900! They better be nice.
The Oracles were on sale for $279 and included a $30 gift card. I knew about the potential back up / blind spot, but having them flush mount outweighs the blind spot issue. If they suck, I sell them! Lol

Compressor mounted.
View attachment 36591

Looking at your Jeep and the thought you have in your build. This is the sort of Jeep I would expect to see in a World of Wheels show. Your work is incredible and so well thought out.

 

[Ted392]

Looking at your Jeep and the thought you have in your build. This is the sort of Jeep I would expect to see in a World of Wheels show. Your work is incredible and so well thought out.

Thank you. Appreciated. I've done well over 40 frame up builds (civi and non-civi vehicles) and it takes my mind off of work & health stresses.

 

[Ted392]

Going to be curious if the blind spot warnings are working on these now, let us know.

I read that if you place 2 pieces if foam tape on the lower corners of the bsm, it'll improve. I'll try it out in a few weeks and report back.

 

[Ted392]

Waiting on parts, so I remote mounted the air intake into the cab. Existing hole in the metal. 10mm id hose.

Mounted arb relay as well.

 

[Focker]

They seem like a good option
https://motobilt.com/products/high-clearance-tail-lights-for-jeep-jl

There are these also but not BSM so a no go for me: https://www.combat-offroad.com/products/tail-gunner-tail-lights-1

 

[Mallcrawler_392]

They seem like a good option
https://motobilt.com/products/high-clearance-tail-lights-for-jeep-jl

They look good on the 392

 

[Ted392]

I read that if foam tape is placed on the bsm bracket of the oracle tail lights, it helps the bsm. So I did this and I when I can drive it, I'll update.

 

[Earl 392]

There are these also but not BSM so a no go for me: https://www.combat-offroad.com/products/tail-gunner-tail-lights-1

Cool stuff both are trick