🛠️ What did you do to your Jeep 392 today?

[Viking Jeeper]

Here’s two from back when I installed them on the full doors.
View attachment 29041
View attachment 29042

Those are just the panels, the first version they made. I got the newest ones that are actually pockets. They are as deep as possible and the front does not fit the 24's. Their website shows a water bottle in the rear tray but I dont think a beer can will fit. They had a good Black Friday deal and still honored the 15% military discount. I called to ask if they were really going to charge $85 for shipping and they knocked it down to $20.

 

[Viking Jeeper]

Here’s two from back when I installed them on the full doors.
View attachment 29041
View attachment 29042

Kind of like the bronze.

 

[ameldorf]

I didn't know they would fit in the front too. Is there any room to put anything in the front?

I bet you could make a mount for a pistol that would bolt to them. I can't find a good place for a pistol.

You can fit something towards the front like a water bottle molle or smaller molle pouch. A firearm mount likely only effective if you’re a lefty (for driver side) or practiced drawing from that side.

 

[ameldorf]

As a note for new style, if they stick out further towards seat, it’ll likely hit a flashlight on seat rail mount or a compressor hose quick connect.

 

[Viking Jeeper]

As a note for new style, if they stick out further towards seat, it’ll likely hit a flashlight on seat rail mount or a compressor hose quick connect.

Probably right but my compressor has a short, braided hose on it, no fixed quick connect.

 

[Broncocuck]

Man you have room to put a lift in that garage.
just don’t block your FJB flag

Ya maybe, takes up a lot of width though I think

 

[Phil921]

Fabricated 1st revision plate for the backside of the bumper. I got some work to do on the bends....

 

[chrisswank]

I installed the GOAT step sliders. Now my wife can get in the Jeep no problem!

 

[Phil921]

Happy wife, happy life ... and more cool stuff for the rig. Looks good! Mine said that i needed to install something so she could get in, so I put on the Rock Slide Engineering step sliders.

 

[84jeepjohn]

I hit some patriotic milage!!!

And I got my hood graphic on yesterday.

 

[Phil921]

I hit some patriotic milage!!!
View attachment 29138
And I got my hood graphic on yesterday.
View attachment 29139

Uncle Sam approves this post... nice looking graphic!

 

[At Risk Ute]

New sliders.

 

[Phil921]

Got a delivery date from Artec for front (JL5114) & rear (JL5111) Inner Fenders and going to have them powder coated matte black upon arrival. Will pass on a couple pics post-install....

 

[ParadigmDawg]

They started my lift yesterday. I will get it back today or tomorrow.

 

[Phil921]

This sweet License Plate Frame I installed from HMC Billet adds at least 25hp, right? Probably 50hp if I install the bottom two fasteners!

 

[ParadigmDawg]

Got mine back from the shop. Terraflex RT3 3.5, Falcon 3.3s, Raceline wheels and Nitto Ridge Grapplers 35x12.5x17.

 

[Exec_392]

Couple of things added:

XR Flares
Rugged Ridge Hood Locks
Ceramic Coat
Distinction applied, painted flag cowl cover
Front Tint
Hot heads headliner
Terra Acoustics front speaker mod (these are worth the money if anyone is wondering)
Baja LP4s
Bulletproof dash mount
Security systems
Rokblokz XL mud flaps

Just need to get some bronze KMC wheels I’ve been eyeing. Seems to only be two choices with +18 offset, everything else is +1 or 0. Was also thinking about the AR Stirrups for the stock rock rail.

 

[Donkey's Dad]

I hit some patriotic milage!!!
View attachment 29138
And I got my hood graphic on yesterday.
View attachment 29139

I have the same graphic, but with the HEMI lettering cut out on the black layer above the 392. Love my Firecracker!!

 

[Casper]

Couple of things added:

XR Flares
Rugged Ridge Hood Locks
Ceramic Coat
Distinction applied, painted flag cowl cover
Front Tint
Hot heads headliner
Terra Acoustics front speaker mod (these are worth the money if anyone is wondering)
Baja LP4s
Bulletproof dash mount
Security systems
Rokblokz XL mud flaps

Just need to get some bronze KMC wheels I’ve been eyeing. Seems to only be two choices with +18 offset, everything else is +1 or 0. Was also thinking about the AR Stirrups for the stock rock rail.

Cool stuff, but given the option I would always buy Made in USA 67Designs vs the Bulletproof Chinese clone.

Can't stand products that use American Flag imaginary to sell imported stuff.

Sorry for the rant - this is not about you but about Bulletproof. We're (still) a free country and I respect your choice.

 

[Exec_392]

Cool stuff, but given the option I would always buy Made in USA 67Designs vs the Bulletproof Chinese clone.

Can't stand products that use American Flag imaginary to sell imported stuff.

Sorry for the rant - this is not about you but about Bulletproof. We're (still) a free country and I respect your choice.

Oh had no idea about 67 Deisgns, have always used bulletproof designs. Looks like now it’s only assembled in USA

No you’re 100% right. I hate that also. I always try to buy US Made. So sick of Chinese crap. That bothers me now.