🛠️ What did you do to your Jeep 392 today?

[Viking Jeeper]

Sadly it won't stop there because after all that weight, it will need a 3.5" Terraflex lift and 37s...which leads to new steering which leads to new bumpers since the bumper is already off...

I am super smart with the vehicles that I put a lot of money into. An example would be my TRX, I spent a lot of money on ADD bumpers, Rigid and BD lights, ARB, BuiltRight molle panels in the bed, 37s and a lift. Got it exactly where I wanted it and then traded in in on the 392. Before that, I did a ton of mods to my AMG and then traded it in for the TRX.

I have no idea what is wrong with me.

I added air bags to my stock suspension after Tereflex tire carrier and support, tailgate table, AAL shelf and refer slide. I figured it was temporary but its still holding up.

 

[Ted392]

It (mods), never ends until you sell it. Until then, enjoy the experience!

 

[ParadigmDawg]

It (mods), never ends until you sell it. Until then, enjoy the experience!

Yep, been doing that for the 44 years that I have been driving. It started out with a 69 firebird daily driver and a 68 Camaro drag car, when I was 15.

 

[Socal_392]

Got the Evo Bomber Rockers back from powder coat today and put them on. Straightforward install, just a bit tedious. Very happy with the look and added protection.

 

[ParadigmDawg]

Ordered a few parts:

Teraflex Alpine RT3 kit

Falcon Shocks SP2 3.3​

Nitto Ridge Grapplers 37x12.5

Raceline

951BZ Ryno​

This fits right in with "I am going to keep this stock" that I told myself I would do. I didn't even make it until my real license plates came in. I am still on paper plates.

It goes to the shop on December 21st.

 

[L3FTY]

Ordered a few parts:

Teraflex Alpine RT3 kit

Falcon Shocks SP2 3.3​

Nitto Ridge Grapplers 37x12.5

Raceline

951BZ Ryno​

This fits right in with "I am going to keep this stock" that I told myself I would do. I didn't even make it until my real license plates came in. I am still on paper plates.

It goes to the shop on December 21st.

I'm right there with you. I installed my winch the night I brought it home. Rust proofed the frame and had my overhead molle rack in the day after. Adding Rokblokz this morning

 

[ParadigmDawg]

I'm right there with you. I installed my winch the night I brought it home. Rust proofed the frame and had my overhead molle rack in the day after. Adding Rokblokz this morning

I can't wait for the lift.I think I scraped all the paint off of my skids yesterday

 

[L3FTY]

I can't wait for the lift.I think I scraped all the paint off of my skids yesterday

Well there you go, free lift c/o mother nature

 

[ameldorf]

Added an AAL flat tray for the jack and a behind the seat shelf.

 

[Viking Jeeper]

Added an AAL flat tray for the jack and a behind the seat shelf.
View attachment 29015
View attachment 29016
View attachment 29017

I really like AALs products. That jack takes up a ton of space and that behind the seat shelf, as nice as it is, is expensive! I did get a full set of their new door pockets. Have not had the heart to install them yet.

 

[ameldorf]

I really like AALs products. That jack takes up a ton of space and that behind the seat shelf, as nice as it is, is expensive! I did get a full set of their new door pockets. Have not had the heart to install them yet.

Door pockets are nice. Have them on regular and half doors. Easy install but if you’re not into drilling the doors, I could see being hesitant.

 

[Viking Jeeper]

Door pockets are nice. Have them on regular and half doors. Easy install but if you’re not into drilling the doors, I could see being hesitant.

How did you get rid of your factory nets on the doors? I have not really looked into that yet. I got the deep pockets for the rear doors. I will probably have to modify my Goose Gear copy but thats ok.

 

[ameldorf]

How did you get rid of your factory nets on the doors? I have not really looked into that yet. I got the deep pockets for the rear doors. I will probably have to modify my Goose Gear copy but thats ok.

Sharp razor and pull the net as tight as you can as you cut it off as close to the plastic as possible.

 

[Bocephus]

 

[Earl 392]

Hood scoop lights and a set of 35 inch grapplers, trying make it different without being crazy

Man you have room to put a lift in that garage.
just don’t block your FJB flag

 

[Earl 392]

Sharp razor and pull the net as tight as you can as you cut it off as close to the plastic as possible.

B4 I cut my nets off ( there’s a joke in there) how about a picture of the pockets please.thanks

 

[ameldorf]

B4 I cut my nets off ( there’s a joke in there) how about a picture of the pockets please.thanks

Here’s two from back when I installed them on the full doors.

 

[ParadigmDawg]

Here’s two from back when I installed them on the full doors.
View attachment 29041
View attachment 29042

I didn't know they would fit in the front too. Is there any room to put anything in the front?

I bet you could make a mount for a pistol that would bolt to them. I can't find a good place for a pistol.

 

[Guest862]

I didn't know they would fit in the front too. Is there any room to put anything in the front?

I bet you could make a mount for a pistol that would bolt to them. I can't find a good place for a pistol.

The Shooter’s Thread

Being some of us like the little pew-pews, I thought I would redirect traffic here to avoid ay wayward verbal spats. Enjoy! Another member asked about the indoor laser target system I bought. https://www.itargetpro.com/

www.jeep392.com

 

[Earl 392]

Here’s two from back when I installed them on the full doors.
View attachment 29041
View attachment 29042

Nice thanks