hazards280
Well-known member
-
Featured
- #2,001
Where did you buy that extension from? I like the size of the contact pad compared to others I have seen.
Thanks in advance!
🛠️ What did you do to your Jeep 392 today?
- Thread starter willy
- Start date
Thanks in advance!
Fast-n-Furious
Well-known member
Rampage
Active member
Hey anyone install lasfits key fob activated hood lock on a 2024 yet? It worked perfect on my 2022 but not sure if any changes were made around the hood up front.
arcticaaron
Member
NV skid plates
84jeepjohn
Well-known member
I REALLY Want to do that!!!!
Never seen that skid system before, looks well thought out and I like that its modular. I have friends with the Metalcloak and Artec, any particular reason you went with the Next Venture skid setup?
- Nov 5, 2023
- 1,463
- 2,612
- Current Rides
- 2023 Wrangler Rubicon 392, 2024 Wrangler Rubicon X
I like how they have the cutting board cover to help slide. My wife wants them but I want her to get Artech.
At Risk Ute
Well-known member
Installed ASFIR diff skids. Still need to install the exhaust and motor/tranny skids.
Well, I'm done (every self respecting Jeep owner knows that's not true)... So I'll say I'm done for at least the next 8wks until after Moab; we'll see where the path leads from there.
Had the Artec full bellypan and exhaust skid installed along with the Artec front & rear inner fender liners (powder coated textured matte black in the shop). Wish I could take the credit for the install but time got way away from me.
Possible next steps are:
- Ton Crates (not likely)
- 300M RCV's (likely route)
- 4.88's
- Tom Woods front and rear
- or... just leave her be til shit breaks
Just trying to find that sweet balance between long drives to the trail and a very capable trail eating succubus.
Had the Artec full bellypan and exhaust skid installed along with the Artec front & rear inner fender liners (powder coated textured matte black in the shop). Wish I could take the credit for the install but time got way away from me.
Possible next steps are:
- Ton Crates (not likely)
- 300M RCV's (likely route)
- 4.88's
- Tom Woods front and rear
- or... just leave her be til shit breaks
Just trying to find that sweet balance between long drives to the trail and a very capable trail eating succubus.
Attachments
Hi, Love your build!!Well, I'm done (every self respecting Jeep owner knows that's not true)... So I'll say I'm done for at least the next 8wks until after Moab; we'll see where the path leads from there.
Had the Artec full bellypan and exhaust skid installed along with the Artec front & rear inner fender liners (powder coated textured matte black in the shop). Wish I could take the credit for the install but time got way away from me.
Possible next steps are:
- Ton Crates (not likely)
- 300M RCV's (likely route)
- 4.88's
- Tom Woods front and rear
- or... just leave her be til shit breaks
Just trying to find that sweet balance between long drives to the trail and a very capable trail eating succubus.
Just brought a 2024 home last week and in the process of scheduling with my shop to install the Artec full belly skid system plus muffler.
Curious, I don't think I see the muffler tip skid portion installed, was that by design?
Thanks, much appreciated! It's just the angle of the picture as it was installed as supplied; better picture below. They hug the tips pretty tight, but they do stick out slightly as in the OEM website pics. Congrats on your '24 and enjoy the ride!
Oh gotcha, clearly missed that from the angle, thanks! Really like the design of the Artec setup so working to order it along with ARB diff covers and f/r lca weld on skids.
Pic of the 2024 the day I got it back home from Koons, let the customization begin! (to the OP apologies for the tangent)
ameldorf
Well-known member
Started the rear Fox bump stop install. Amazon sent wrong size hole saws so stalled for a bit. Got the factory cups cut off. Also managed to cut half way through one of the rear speed/ABS sensors : ). Have one on the way.
That’s a pisser
Fast-n-Furious
Well-known member
I don’t like logos from aftermarket products in general. A while ago tried to erase the mud flap logos with acetone but can still see a bit. Cut em short today and rounded the corners. Look much better.
ameldorf
Well-known member
Finished the rear bump stop install.
Nice setup, what rear sway bar is that? Are you running the Gamechanger lift and what bumpstock mounts did you use?
ameldorf
Well-known member
It is the 3.5 Metalcloak lift. It’s a RockJock Antirock. Bump stops mounts are Fox weld ins for the IFPs.
Create an account or login to comment
Join now to leave a comment enjoy browsing the site ad-free!
Create account
Create an account on our community. It's easy!
Log in
Already have an account? Log in here.
