Wheel spacers

[Cali392JL]

Looks to me like the pockets in the wheels are deep enough to allow the factory studs to fit without interference. It you can measure the depth to confirm, great, if not bolt one up and see if the stud mars the inside of the wheel pocket.

Use thread locker and a torque wrench on the spacers when you bolt them up for good.

 

[redrubi]

Looks to me like the pockets in the wheels are deep enough to allow the factory studs to fit without interference. It you can measure the depth to confirm, great, if not bolt one up and see if the stud mars the inside of the wheel pocket.

Use thread locker and a torque wrench on the spacers when you bolt them up for good.

Worked like a charm with the factory XR wheels. Not so good when the aftermarket wheels do not have any pockets in between the factory studs

 

[Murf]

anyone know the torque specs please?

 

[Smess]

110-120

 

[Murf]

110-120

Mahalo

 

[Jeepstin392]

Be sure to research the legality of the spacers in your state. Should a failure occur, and found to be the culprit, resulting in harm or death, you’ll be held liable.

 

[Smess]

130 sorry, 110 and 120 were JK and TJ specs