Great deal on a Powerful winch

OldVetteGuy

There is no replacement for displacement!
Joined
Jul 3, 2025
Messages
678
Reaction score
1,119
Location
Santa Fe
Current Rides
2025 Rubicon 392, 2008 Hummer H2, 2018 JLUR Retired, 2015 JK Sahara 2dr retired,
A friend of mine recently purchased one of these for his Gladiator and rave's about it all the time. Personally I think its every bit as good as the Warn winch on my 25FE, in fact it is probably more powerful. I don't usually advertise products but there are many 392 owners that want winches. This is a great opportunity to grab one at Harbor Freight for a really good price!
winch.pg.webp
 
They run a yearly deal around Christmas during their 12 days of deals promotion. Last year it was $180 off.
 
A friend of mine recently purchased one of these for his Gladiator and rave's about it all the time. Personally I think its every bit as good as the Warn winch on my 25FE, in fact it is probably more powerful. I don't usually advertise products but there are many 392 owners that want winches. This is a great opportunity to grab one at Harbor Freight for a really good price!
View attachment 57523
Matt runs these on his Wrecker, I think he's got 6 of them. If you're not familiar with his channel Matt's Offroad Recovery, you should check him out. His content is educational and entertaining.
Here's one to get you started where he replaces one he abused on a job (9 hours of continuously pulling).
 
Last edited:
A friend of mine recently purchased one of these for his Gladiator and rave's about it all the time. Personally I think its every bit as good as the Warn winch on my 25FE, in fact it is probably more powerful. I don't usually advertise products but there are many 392 owners that want winches. This is a great opportunity to grab one at Harbor Freight for a really good price!
View attachment 57523
Between the duty rating, wireless remote, and synthetic line - I’m adding this to my NAUGHTY list of stuff to install this winter. Any idea what mounting plate your buddy used for his Gladiator….? Or suggestions he would make if he was going to do it again?
 
He ordered part no. 82215182AD from Mopar. Everything fit perfectly but required a lot of work. He said he wished he would have just purchased the Quadratec one or the Badlands universal winch mount either one would have saved him significant chunk of change.

I will say the Mopar offering is probably the strongest and best made suitable for some serious long term use.
 
He ordered part no. 82215182AD from Mopar. Everything fit perfectly but required a lot of work. He said he wished he would have just purchased the Quadratec one or the Badlands universal winch mount either one would have saved him significant chunk of change.

I will say the Mopar offering is probably the strongest and best made suitable for some serious long term use.
Got it- will research that part number and do more digging. Thanks as always!!

Update: Holy Fsck, they want almost as much for that as they do the winch?!?
 
Warn and Grim winch plates are another good option.
 
You want to spend money on a quality mount since it’s the only thing connecting your winch to your Jeep. I went with Maximus 3 for mine (American made)
OK, that looks/sounds like a good option… and agree on the quality part, want something that actually will not come apart when used… will investigate the warn and grim plates as well. Thanks to all for the feedback…

Update: Just so it’s all in one place; what I’ve found so far. Thinking about what close to another 100 pounds on the very front end looks like…

Winch: Badlands APEX 12000 pound; 68 pounds. Harbor Freight
Maximus Mount: $310; 24 pounds. https://www.maximus-3.com/product-page/jljt-gladiator-winch-mount-plate
Mopar Mount: $560 from Mopar. 19 pounds. https://www.allmoparparts.com/sku/82215182ac.html
Quadratec Mount: They offer a bunch of options; the top rated one is by Rugged Ridge. $360; 39 pounds. Part number 11543.16 https://www.quadratec.com/p/rugged-ridge/winch-mount-plate-jeep-wrangler-jl-11543.16
Warn Mount: $399 at Amazon currently.. 39 pounds. Part number 101255; there is a note that says “Will not work with ZEON XC Winches; With Winches (VR12, VR10, ZEON XD, XD9, M8, VR8)”

Folks fuss about some of the installation hardware included with the Mopar and Warn mounts.
 
Last edited:
OK, that looks/sounds like a good option… and agree on the quality part, want something that actually will not come apart when used… will investigate the warn and grim plates as well. Thanks to all for the feedback…
Also the badland will sit a hair lower in the bumper and may have clearance issues with the free spool lever if you don’t raise it up. Some folks grind down the lever, I didn’t do that… I lifted the winch and it cleared perfectly. Here’s the block to raise the winch in the bumper. It also comes with longer bolts.

Here’s a good video from another member on this forum:
 

Attachments

  • IMG_1302.webp
    IMG_1302.webp
    73.9 KB · Views: 3
Not trying to sway your decision but the factory Mopar which of all is probably the strongest and was a pain in the a$$ to install. Bumper removal, tow hook removal and so on. There is no doubt this thing was engineered to literally hang the Jeep by it.

Most would probably consider it OVERKILL but if safety and constant heavy duty use is your primary concern its rock solid in every respect. They probably also made it with front end crash resistance as well.
 
Not trying to sway your decision but the factory Mopar which of all is probably the strongest and was a pain in the a$$ to install. Bumper removal, tow hook removal and so on. There is no doubt this thing was engineered to literally hang the Jeep by it.

Most would probably consider it OVERKILL but if safety and constant heavy duty use is your primary concern its rock solid in every respect. They probably also made it with front end crash resistance as well.
The factory winch is only rated for 8,000 lbs or are you talking about the winch plate?

Any plate / winch combo you install you’re going to have to remove the bumper etc
 
The factory winch is only rated for 8,000 lbs or are you talking about the winch plate?

Any plate / winch you install you’re going to have to remove the bumper etc
Talking about ta Mopar winch plate being used with a Badlands 12000 winch that was referenced in the start of the therad, not the warn 8k optional equipment on the Wrangler.
 
Talking about ta Mopar winch plate being used with a Badlands 12000 winch that was referenced in the start of the therad, not the warn 8k optional equipment on the Wrangler.
At the end of the day - smartest decision is buy once, cry once… DAMHIK. Hard part is figuring out what that is….
 

Create an account or login to comment

Join now to leave a comment enjoy browsing the site ad-free!

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top