Borla atak exhaust

Few things

The Borla system does get rid of the MDS Drone completely.
The quiet mode / closed is a significant step up from stock at all speeds and idle.
The open / performance 4k-5k especially is unbelievably badass. She screams like you haven’t heard her.
2.5-3.5 you definitely get more pop and burble on decel including Off-Road+ bonuses.
+ give it a run through the low gears (also in off-road+) and it will have you remembering why this is your favorite vehicle 🥊
Obnoxious hooliganism with respect to the ATAK

Edit: formatting
 
Last edited by a moderator:
Few things

The Borla system does get rid of the MDS Drone completely.
The quiet mode / closed is a significant step up from stock at all speeds and idle.
The open / performance 4k-5k especially is unbelievably badass. She screams like you haven’t heard her.
2.5-3.5 you definitely get more pop and burble on decel including Off-Road+ bonuses.
+ give it a run through the low gears (also in off-road+) and it will have you remembering why this is your favorite vehicle 🥊
Obnoxious hooliganism with respect to the ATAK

Edit: formatting
Hey… only those with a little estrogen call the angelic sounds of a V8 “obnoxious”.
Remove that wire from your vocabulary mister. Or you’ll go in time out. 🤣
 
Like a choir of angels Jeepstin. A choir of pissed off, Gatling gun wielding, fire spitting angels. Especially at that 4-5k range…
We are going to make sure the heathens hear the angels call. 🎰
Hell hath no fury like a “ATAK’d” 392. 👹🔥
 
Last edited:
An update
3.5 months later and less than 1,000 miles.
I notified Borla as this should be covered under warranty. But damn, I don’t want to take it apart!

I don’t care about the interior of the tips. More concerned with the edge peeling away.

I have to say, it took 3 years for my applied ceramic job to start peeling on my GC SRT ATAK.
 

Attachments

  • 0CE00DBF-123E-465F-88BA-D69CA0A4933C.webp
    0CE00DBF-123E-465F-88BA-D69CA0A4933C.webp
    67.2 KB · Views: 41
  • 2A2DFB8E-9EEC-47C8-BF4D-8BF91CAF4E1A.webp
    2A2DFB8E-9EEC-47C8-BF4D-8BF91CAF4E1A.webp
    76.3 KB · Views: 43
  • FE6D823F-2F1B-441C-B754-DE4C5BAE0EF5.webp
    FE6D823F-2F1B-441C-B754-DE4C5BAE0EF5.webp
    72.8 KB · Views: 42
  • 36605D1B-8276-49D3-91C7-2125BB90A03A.webp
    36605D1B-8276-49D3-91C7-2125BB90A03A.webp
    94.6 KB · Views: 39
  • 2A15E93C-EB21-46EE-A9B8-80E75A1A0210.webp
    2A15E93C-EB21-46EE-A9B8-80E75A1A0210.webp
    94.5 KB · Views: 44
An update
3.5 months later and less than 1,000 miles.
I notified Borla as this should be covered under warranty. But damn, I don’t want to take it apart!

I don’t care about the interior of the tips. More concerned with the edge peeling away.

I have to say, it took 3 years for my applied ceramic job to start peeling on my GC SRT ATAK.
Something to look forward to, taking delivery next week and have the same exhaust ready to put on.
 
Something to look forward to, taking delivery next week and have the same exhaust ready to put on.
You’re looking forward to the ceramic flaking off?
 
UPDATE
Borla is standing by their warranty. Sending me a new exhaust. Not sure what they will do with the old unit.
 

Create an account or login to comment

Join now to leave a comment enjoy browsing the site ad-free!

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top