392 Hemi logo valve/coil cover

OldVetteGuy · 2026-10-30T09:58:15-0600

I know there are a few that have installed these covers on their 392 Wranglers.

I believe some modification are necessary to do this. Perhaps someone who had done this can share what mods were required to make them fit as they should.
Thanks!

Rob_R · 2026-10-30T10:03:05-0600

Part numbers would also be very helpful!

OldVetteGuy · 2026-10-30T12:33:28-0600

Rob_R said:
Part numbers would also be very helpful!

You asked, here you go!
5038544AE Right Side
5038543AE Left Side

Rob_R · 2026-10-30T14:27:51-0600

OldVetteGuy said:
You asked, here you go!
5038544AE Right Side
5038543AE Left Side

Thank you, Good Sir!

18usc371 · 2026-10-30T14:41:47-0600

I used a dremel with a cutting wheel, traced/marked and trimmed some the front edges, and sanded them smooth. Love it.

OldVetteGuy · 2026-10-30T14:44:17-0600

18usc371 said:
I used a dremel with a cutting wheel, traced/marked and trimmed some the front edges, and sanded them smooth. Love it.View attachment 57555

Great looking and a nice upgrade for the factory Wrangler covers that the gold peels on anyway!