What did you do to your Jeep 392 today? 🛠️

[CBH]

I like where you mounted your Element fire extinguisher. Mine came with two clips. Do you have a link for the Maglight mount?

Here’s the link for the Quadratec Mount:

Quadratec Flashlight Holder for 18-22 Jeep Wrangler JL Unlimited & Gladiator JT

Never get stuck out on the trails in the dark again with the Quadratec Flashlight holder for your Wrangler JL Unlimited & Gladiator JT! This simple to install flashlight holder simply clamps onto your seat's frame so you are not fumbling around looking for your flashlight in the dark.

www.quadratec.com

or for a few dollars less, you could go with this mount (same design, different company):

Amazon.com: Flashlight Holder for 18-21 Jeep Wrangler JL Unlimited & Gladiator JT - NEW : Home & Kitchen

Buy Flashlight Holder for 18-21 Jeep Wrangler JL Unlimited & Gladiator JT - NEW: Oven Mitts - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

 

[CBH]

Or you could get this combo from ECCP with a 2-D-Cell Flashlight:

https://www.amazon.com/Flashlight-Holder-Wrangler-Unlimited-Gladiator/dp/B08R31QSPN/ref=sr_1_3?dchild=1&keywords=ECCP&qid=1633397533&sr=8-3

 

[CBH]

Or you could get this combo from ECCP with a 2-D-Cell Flashlight:

https://www.amazon.com/Flashlight-Holder-Wrangler-Unlimited-Gladiator/dp/B08R31QSPN/ref=sr_1_3?dchild=1&keywords=ECCP&qid=1633397533&sr=8-3

.

This is where I mounted my ELEMENT FIre Extinguisher in my other vehicle.

 

[Viking Jeeper]

After 3 weeks I finally got my badges in from the dealer (didn't notify me they had been in 2.5 weeks), and got those put on along with my steps. So far the wheels and tires work for me. I just wanted a little decor. Clean, subtle, but meaningful.View attachment 1149View attachment 1151View attachment 1152View attachment 1153View attachment 1154

Interesting....I'm not a fan of the gold accents at all and am thinking of de badging when I get it. They will know what engine is in it soon enough.

 

[ScrappyCoco]

Some more teaser picks from the shop.

 

[BenLandry]

Chopped the fenders this week. I went with American Adventure Labs high line fender brackets and their inner fenders. I had them powder coat the brackets red and the inner fenders black satin. I also ordered all of the hardware black. They look really clean and almost stock from a distance. I’ll post some before and after pics. For reference I have 37x13.5x20 wheels. No additional lift…yet. Have to use inner fenders for the Diesel engine btw

 

[ScrappyCoco]

Phase 1 done. Tint, Xpel, Gtechniq Ultra & Exo coating, badging,

and lights all smoked.

 

[grim]

Phase 1 done. Tint, Xpel, Gtechniq Ultra & Exo coating, badging,View attachment 1617View attachment 1618 and lights all smoked.

Looks clean. Nicely done!

 

[Deb3667]

Ceramic detail , color correction and new running boards

 

[Guest284]

Interesting....I'm not a fan of the gold accents at all and am thinking of de badging when I get it. They will know what engine is in it soon enough.

Yeah it's all personal preference, but mine didn't get attention until I put those badges on. Now I get asked at stations and parking lots, get followed by teens, or get thumbs up at red lights around town by other drivers.

 

[MOrubi]

So over the last week:
17x9 Method 312’s
37x13.5r17 Toyo Mt’s
Steersmarts Yeti Front TB
Metalcloak Rear TB
Metalcloak Front LCA’s
Teraflex Shock Extensions
Teraflex Swaybar Links
Teraflex 1.5” Spacer Lift w/ TF Bump Stops
Fox ATS Stabilizer
Rugged Ridge Tire Carrier Set up
Tazer

 

[JuneGeorge]

On board air finished

 

[Jeepstin392]

View attachment 1667
So over the last week:
17x9 Method 312’s
37x13.5r17 Toyo Mt’s
Steersmarts Yeti Front TB
Metalcloak Rear TB
Metalcloak Front LCA’s
Teraflex Shock Extensions
Teraflex Swaybar Links
Teraflex 1.5” Spacer Lift w/ TF Bump Stops
Fox ATS Stabilizer
Rugged Ridge Tire Carrier Set up
Tazer

How do you like the Teraflex 1.5" with this set up? I've been researching and will eventually do CA's, springs, shocks, etc. Just looking for something to provide clearance for 3's till I figure out which lift I am going with.

 

[MOrubi]

How do you like the Teraflex 1.5" with this set up? I've been researching and will eventually do CA's, springs, shocks, etc. Just looking for something to provide clearance for 3's till I figure out which lift I am going with.

This is the route I am going until I do a full game changer lift. So far so good. Everything looks proportional in my opinion. The stabilizer and trackbars have really helped complete it for now

 

[ScrappyCoco]

Well waited since June for my Mickey Thompson Baja Boss A/T in 37's and had go get the KMC Technic in gold. So they were Powder coated forged Charcoal and center caps in satin black. Getting closer to my vision.

 

[Striker392hydroblu]

So today driving back from getting super octane from Costco in phx a car made a last minute right hand turn. Nothing out if the normal for this area. Well before I hit the brakes the 392 did it FOR ME. Engine cut way back and felt like it tool full control over the vehicle. Aint never happened before and just seeing if anyone else has had this happen? Not crazy as this really occurred about 15 mins ago.

 

[Striker392hydroblu]

So today driving back from getting super octane from Costco in phx a car made a last minute right hand turn. Nothing out if the normal for this area. Well before I hit the brakes the 392 did it FOR ME. Engine cut way back and felt like it tool full control over the vehicle. Aint never happened before and just seeing if anyone else has had this happen? Not crazy as this really occurred about 15 mins ago.

Guess my next question would be how da fukkk do we deactivate this?

 

[grim]

So today driving back from getting super octane from Costco in phx a car made a last minute right hand turn. Nothing out if the normal for this area. Well before I hit the brakes the 392 did it FOR ME. Engine cut way back and felt like it tool full control over the vehicle. Aint never happened before and just seeing if anyone else has had this happen? Not crazy as this really occurred about 15 mins ago.

Yeah, happened to me a few months ago. Just part of the safety controls.

 

[Striker392hydroblu]

Yeah, happened to me a few months ago. Just part of the safety controls.

Ok well it was not safe in what it did to me and could have caused the guy behind me to crash into me. So tech is not good if I get rear ended due to this so called feature. Imho again how do we turn this off hoping there is a way other than tearing it down and rebuilding with a carb. But that might be fun come to think of it. EPA be damned.

 

[ScrappyCoco]

Ok well it was not safe in what it did to me and could have caused the guy behind me to crash into me. So tech is not good if I get rear ended due to this so called feature. Imho again how do we turn this off hoping there is a way other than tearing it down and rebuilding with a carb. But that might be fun come to think of it. EPA be damned.

It's happened to me but makes a awful sound and started to break for me but I did it about same time. Probably some driver assistance shit. Has to be a way in settings to turn it off. Ask Scott Blum in the FB 392 page. He works for Corp. I think he wrote the manual lol