REBIRTH of Barbie, say Hi to JeepZilla - Stg3Cam swap/shorty headers, TeraFlex Longarm Coilovers, Dynatrac 60/80s, Next Venture 7075 Skids & Motobilt!

[jeepguru]

Got the new Katzkin leather seats installed, with as close as we could to matching the Surge Green wrap. These are full replacement covers and not just slip-overs. Plus Katzkin is the OEM to Stelantis, so the fitment is spot on. If you want a set for your Jeep, just message myself or @Todd@DoetschOffRoad for a quote. We can custom design them with different styles, materials, add cooling (includes heat as well), logos, etc.

The last 2 pics are the similar style I did in my last 392.

 

[Brutus 392]

Got the new Katzkin leather seats installed, with as close as we could to matching the Surge Green wrap. These are full replacement covers and not just slip-overs. Plus Katzkin is the OEM to Stelantis, so the fitment is spot on. If you want a set for your Jeep, just message myself or @Todd@DoetschOffRoad for a quote. We can custom design them with different styles, materials, add cooling (includes heat as well), logos, etc.

The last 2 pics are the similar style I did in my last 392.

View attachment 45169

View attachment 45166
View attachment 45167

View attachment 45171
View attachment 45172

Those look nice !

 

[CAMEL2R]

I suppose they can be done in 392 gold...can they add AEV's logo on the head rests? Or is that infringement? What other styles are there?

 

[jeepguru]

I suppose they can be done in 392 gold...can they add AEV's logo on the head rests? Or is that infringement? What other styles are there?

View attachment 45184

Sent you a DM Steve. But typically the trademarked logos are restricted to their use only.

 

[Todd@DoetschOffRoad]

I suppose they can be done in 392 gold...can they add AEV's logo on the head rests? Or is that infringement? What other styles are there?

AEV is a protected copyright. It would require a signed letter from AEV in order to be done. If you have an AEV vehicle or a dealer upfitted AEV components to it, it shouldnt be a problem to obtain.

 

[CAMEL2R]

Sent you a DM Steve. But typically the trademarked logos are restricted to their use only.

I won't tell anyone.

 

[CAMEL2R]

AEV is a protected copyright. It would require a signed letter from AEV in order to be done. If you have an AEV vehicle or a dealer upfitted AEV components to it, it shouldnt be a problem to obtain.

Fair enough. Thanks guys!

 

[Earl 392]

1st step was strip Barbie's bright pink wrap off and get to tearing down the motor to start the Stage 3 cam, shorty headers and other motor upgrades. All this with 250 miles on the odometer!!!

View attachment 43546

No Jlu 2009.

 

[jeepguru]

No Jlu 2009.

@Earl 392 we've got kits for ANY year JK, JL or JT. Here's my 2009 JK, back in 2009, with one of the 1st Katzkin kits we ever installed!

 

[Earl 392]

@Earl 392 we've got kits for ANY year JK, JL or JT. Here's my 2009 JK, back in 2009, with one of the 1st Katzkin kits we ever installed!

View attachment 45190

View attachment 45191

our 2nd build named JeepZilla, but enough time has passed. The 1st was a 2009 Jeep Wrangler JLU Rubicon that we built back in 2009 for Bushwacker. Here I am back in 2010 enjoying it at the annual Hump N' Bump event after SEMA, in Logandale
This is what I was referring about

 

[Warped]

Ok, Dynatrac front Dana 60 and rear Dana 80 axles are hung and she's back on the ground wearing a set of 44" Mickey Thompson tires on 20" Fuel Rincon beadlocks. Got our Doetsch Off-Road 2.5 TON 7075 Aluminum Steering kit installed as well. JeepZilla is getting closet to be able to start wheeling!!

View attachment 44479
View attachment 44480
View attachment 44481

I like the look much better than the pink and really respect the work put into it. It may be a bit over the top for my taste but, if you're giving it away, I'd be more than ecstatic to take it. Huge fan of the new wrap

 

[jeepguru]

We got a set of Motobilt weld-on sliders installed over the weekend. These are hands down the best weld-on slider out there. I've taken quite a few hits on my last 392 with these and they barely dented the underside. Since I have a TeraFlex long-arm, Motobilt provides some builder parts to allow you to craft your own rear frame mount so it doesn't interfere with the rear control arm bracket. It takes a little trial and error but the result is BEEFY!

We will also do 10% off all Motobilt right now until the end of the month. Just call the shop 480-848-8482 or email [email protected] for a quote!!

 

[HD392]

We got a set of Motobilt weld-on sliders installed over the weekend. These are hands down the best weld-on slider out there. I've taken quite a few hits on my last 392 with these and they barely dented the underside. Since I have a TeraFlex long-arm, Motobilt provides some builder parts to allow you to craft your own rear frame mount so it doesn't interfere with the rear control arm bracket. It takes a little trial and error but the result is BEEFY!

We will also do 10% off all Motobilt right now until the end of the month. Just call the shop 480-848-8482 or email [email protected] for a quote!!

View attachment 45825
View attachment 45826
View attachment 45827
View attachment 45828

View attachment 45829
View attachment 45830

Bad ass!