Leveling

kbernard

Member
Joined
Sep 23, 2021
Messages
20
Reaction score
9
Location
OBX, NC
Installed a winch and it dropped the front a little bit. Has any body done anything or tried anything to level after adding a winch?
 
I installed a winch and a bully bar and some lights... dropped the front just a little, which to me is now perfect. I don't like vehicles that look like they are "squatting" when driving down the road. LOL
 
I am installing the Teraflex 1" spring spacer. Took the springs out yesterday. I didn't measure before adding the winch, bar and lights but after it's about 3/4 lower in front. I am also installing the DV8 adjustable bump stops while I have it apart. Just ordered and should have them before the weekend to wrap it up.
 
Had the Teraflex 1" spacer installed as well. Made a big difference. Before the install it felt like I was driving downhill.
 
Awsome guys thanks for the heads up!!! I'll get one on order.
 
Measuring from the ground to the bottom of the fender right at the hub center I'm about .5" lower in the front than in the rear due to the Warn winch and plate. I'm adding a 0.5" spacer to the front while upgrading the shocks and I'll report back how much that changes the stance.
 
following this as I"m going to weigh down my front as well. Also can anybody with stock suspension who has added a winch and NOT leveled it off post a pic from the side? I'd like to see if its noticeable.
 
I chopped my fenders but have not leveled. Gonna lift in a few months. My winch dropped the front just about an inch
 

Attachments

  • 01C1709E-E167-48FD-B1C4-62FF00DB8FCB.jpeg
    01C1709E-E167-48FD-B1C4-62FF00DB8FCB.jpeg
    456.6 KB · Views: 111
  • 6044D38E-2432-427E-88CD-152422B1A66A.jpeg
    6044D38E-2432-427E-88CD-152422B1A66A.jpeg
    494 KB · Views: 113
  • CB1E1C38-89D0-467E-A188-596ACF798790.jpeg
    CB1E1C38-89D0-467E-A188-596ACF798790.jpeg
    503.5 KB · Views: 114
Back
Top