JEEP 392 Mods Complete (for now)

[crawco]

It took me about two weeks to install it all but it came out great. I still have some work under the front bumper to reinforce for towing 4 wheels down.

List of Mods include:
Additive Desert Design Stealth front bumper
Additive Desert Design Stealth rear bumper
Additive Desert Design Stealth Fighter tire carrier
Additive Desert Design Stealth front and rear doors
Fuel Krank 17X9 Wheels
Cooper Discover SST Pro 37 X 13.5 X 17 Tires
RPB Stealth Power Running Boards
Rigid Radiance Lights in front and rear bumper and lower A pillar
Warn Zeon Platinum 10S Winch

List of mods

 

[Rscx4]

Very nice.

 

[Rscx4]

Do your pics include the new RPB running boards?

 

[kmack402]

Can you tell me your exact apillar mount and light combo? Mods look great!

 

[crawco]

Do your pics include the new RPB running boards?

Yes they look just like the stock Rubicon rock rails when they not deployed.

 

[crawco]

Can you tell me your exact apillar mount and light combo? Mods look great!

Mounts are Rugged Ridge 11232.73, you need to buy longer bolts (1/2" longer) because they are made for a standard Rubicon hood. Cube lights are Rigid Radiance red backlit.

 

[NewJeepGuy]

How is your license plate mounted and is it working out there?

 

[crawco]

How is your license plate mounted and is it working out there?

It is mounted on the rear bumper, no problems.

 

[Capsfan]

I noticed you do not have any suspension mods to fit 37 x 13.5. Is this correct?

 

[crawco]

I noticed you do not have any suspension mods to fit 37 x 13.5. Is this correct?

None needed. A little heat gun here and there inside the fender wells. The 392 are already lifted stock.

 

[Hi Turtle]

Is the spare tire carrier supported by the bumper and no longer using the door to support the weight?

 

[crawco]

Is the spare tire carrier supported by the bumper and no longer using the door to support the weight?

Yes completely supported by the bumper.

 

[drummr25]

Looks Killer- I love the front end especially. Oh, and if you haven't owned a set of the Coopers before- you'll love them. I'm currently running them on my JKUHR and they've been perfect.

 

[zmpm01]

Great looking rig really like you set up! One thing I would be careful of is flat towing from the bumper unless it is specifically designed to tow from, I almost had a serious incident flat towing a 06 Jeep Liberty from a ARB bumper using all Blue Ox components, nothing home made. It ripped the backing plate thru the bumper leaving a 8" hole. Also a lot of the welds were cracked on both sides of the bumper were it mounted to the frame and caused 20k in damage to my Motor Home and Jeep. I was really surprised the ARB bumper was beefy and I never would have thought it would fail like it did. I would cry if it happened to my 392 and then I would kick my self in the ARSE!

I mention it every time I see anyone talking about flat towing from the bumper. It was a PITA to have this happen in Alaska!

 

[Johnny@JustBoltOns]

It took me about two weeks to install it all but it came out great. I still have some work under the front bumper to reinforce for towing 4 wheels down.

List of Mods include:
Additive Desert Design Stealth front bumper
Additive Desert Design Stealth rear bumper
Additive Desert Design Stealth Fighter tire carrier
Additive Desert Design Stealth front and rear doors
Fuel Krank 17X9 Wheels
Cooper Discover SST Pro 37 X 13.5 X 17 Tires
RPB Stealth Power Running Boards
Rigid Radiance Lights in front and rear bumper and lower A pillar
Warn Zeon Platinum 10S Winch

View attachment 1574View attachment 1575View attachment 1576View attachment 1574View attachment 1575View attachment 1576View attachment 1577View attachment 1578View attachment 1579View attachment 1580View attachment 1581View attachment 1582View attachment 1583 List of mods

That looks great! We sell the full line of ADD and I know getting some of their stuff right now it's hard! We have some stuff instock but most is made to order right now.