Anyone added a switch system beyond the 4 aux switches?

[JuneGeorge]

Completed onboard air the other day to aux 1 switch - arb twin with the more bracket behind the backseat. Working on winch, rock lights, lp6s. I searched through the posts and couldn’t find anything on additional switches beyond the 4 aux switches. The lights have high/low beam - inevitably will run out. Maybe this is a dumb question. I checked out spod and a few others but first take is that the 392’s different engine bay configuration makes those spods and other mounting brackets not compatible with 392. So - I created an account here to speak to other 392 folks that figured this out. Anyone gone beyond the 4 aux switches?

 

[Viking Jeeper]

What is the power requirement for the ARB double? I just installed the single in another vehicle and it needs a 40 amp circuit so I have to assume the double needs 80 amps or 2 x 40 amp circuits. The aux switch circuits at most can handle 40 amps.

 

[JuneGeorge]

What is the power requirement for the ARB double? I just installed the single in another vehicle and it needs a 40 amp circuit so I have to assume the double needs 80 amps or 2 x 40 amp circuits. The aux switch circuits at most can handle 40 amps.

The aux switch only powers the switch. ARB twin goes directly to the battery with the ARB fuse.