Looking for ideas

Chazzard · Mar 9, 2022

I would like to see some pictures of what others have done with a bull bar and lights. I want to keep the factory bumper. And i am hoping i can do this without blocking the view of the front camera.

Viking Jeeper · Mar 9, 2022

If I ever get my Warn low grill guard I would be happy to send pictures. I do have a light bar installed on the factory bumper with bumper extensions removed.

Fast-n-Furious · Mar 9, 2022

I personally like this bull bar on the 2021 Easter safari jeep a lot, but I can't find it anywhere. The closest version is the MAXIMUS-3 JL XLP HOOP (https://maximus-3.com/home/maximus-3-jl-xlp-hoop) but I don't like it that much compared to this one. This design gives enough room around the tow hooks and you could also mount lights.

RugbyRef · Mar 9, 2022

Welcome @Chazzard! Here's a link to a previous discussion about the Maximus-3 Bull Bar/Stinger. There's a pic in thread that shows what it looks like from the front camera view. I'm contemplating this setup as well.

https://www.jeep392.com/threads/maximus-3-camera-visibility-stinger-xlp-hoop.943/

Tim

DavyBoy · Mar 10, 2022

Chazzard said:
I would like to see some pictures of what others have done with a bull bar and lights. I want to keep the factory bumper. And i am hoping i can do this without blocking the view of the front camera.

View attachment 3688

Tree · Mar 10, 2022

Chazzard said:
I would like to see some pictures of what others have done with a bull bar and lights. I want to keep the factory bumper. And i am hoping i can do this without blocking the view of the front camera.

Probably NOT what you are looking for… but of ALL the front bumpers I have had on previous Jeeps, this is the best one because it is very usable and it looks factory.

RugbyRef · Mar 10, 2022

Tree said:
View attachment 3689
Probably NOT what you are looking for… but of ALL the front bumpers I have had on previous Jeeps, this is the best one because it is very usable and it looks factory.

@Tree - is that the AEV bumper? Looks great!

nclion · Mar 10, 2022

Here’s what I did. Baja design LP6, Maximus short hoop, warn zeon.. no problem with blocking the camera.

Tree · Mar 10, 2022

RugbyRef said:
@Tree - is that the AEV bumper? Looks great!

Yes.

Tree · Mar 10, 2022

Tree said:
Yes.

… and thank you!

CPT Papa · Mar 10, 2022

This is Baja Designs LP4's and LP6's with the Maximus 3 SLP Hoop mounted in the reverse direction. Rigids on the edge for side lights. I also have the Quake chop kit in smoke to install. No brand loyalty here, installed Oracle cargo light.
This reminded me I need to get the skid plate back on.
More on this post. https://www.jeep392.com/threads/lighting-and-front-bumper-bull-bar-suggestions.682/

Smess · Mar 15, 2022

What bar does the orange Jeep have?

Its not a Maximus?

Fast-n-Furious · Mar 15, 2022

Smess said:
What bar does the orange Jeep have?

Its not a Maximus?

I can't find that bar anywhere else online. And I believe it's not Maximus.

Smess · Mar 15, 2022

Maximus with LP9's

RugbyRef · Mar 16, 2022

Smess said:
What bar does the orange Jeep have?

Its not a Maximus?

Fast&Furious said:
I can't find that bar anywhere else online. And I believe it's not Maximus.

@Smess and @Fast&Furious - this particular Jeep was built and tested as a concept vehicle for the 2021 Easter Jeep Safari. Motortrend Magazine did an article on it. Here's is the quote about the front fender and bull bar:

"Orange Peelz has increased ground clearance and thus improved off-road performance, thanks in part to a Fox shock-equipped JPP 2-inch suspension lift and a set of 37-inch BFGoodrich Mud-Terrain KM3 tires. Orange Peelz has a lengthy list of other mods, including concept "high-top" fender flares, a concept hood with custom black Mopar hood latches, A-pillar-mounted JPP 5-inch LED lights, a factory-backed windshield made from Corning Gorilla Glass, a custom JPP Rubicon steel bumper with a prototype 2-inch steel grille guard and 8,000-pound-capacity Rubicon Warn winch, custom rock rails, a JPP Swing Gate Hinge Reinforcement (which allows for a larger spare tire), and Mopar all-weather floormats."

Here's a link to the full article - https://www.motortrend.com/features/concept-jeep-orange-peelz/

Tim

Fast-n-Furious · Mar 16, 2022

RugbyRef said:
@Smess and @Fast&Furious - this particular Jeep was built and tested as a concept vehicle for the 2021 Easter Jeep Safari. Motortrend Magazine did an article on it. Here's is the quote about the front fender and bull bar:

"Orange Peelz has increased ground clearance and thus improved off-road performance, thanks in part to a Fox shock-equipped JPP 2-inch suspension lift and a set of 37-inch BFGoodrich Mud-Terrain KM3 tires. Orange Peelz has a lengthy list of other mods, including concept "high-top" fender flares, a concept hood with custom black Mopar hood latches, A-pillar-mounted JPP 5-inch LED lights, a factory-backed windshield made from Corning Gorilla Glass, a custom JPP Rubicon steel bumper with a prototype 2-inch steel grille guard and 8,000-pound-capacity Rubicon Warn winch, custom rock rails, a JPP Swing Gate Hinge Reinforcement (which allows for a larger spare tire), and Mopar all-weather floormats."

Here's a link to the full article - https://www.motortrend.com/features/concept-jeep-orange-peelz/

Tim

Thanks Tim.